Comments on: iMX6 Rex Enclosure in 3D – First version https://www.imx6rex.com/2014/08/imx6-rex-enclosure-in-3d-first-version/?utm_source=rss&utm_medium=rss&utm_campaign=imx6-rex-enclosure-in-3d-first-version FREE Schematic & PCB for Download Sat, 04 Feb 2017 17:33:00 +0000 hourly 1 http://wordpress.org/?v=3.5.1 By: Robert Feranec https://www.imx6rex.com/2014/08/imx6-rex-enclosure-in-3d-first-version/#comment-55 Robert Feranec Wed, 06 Aug 2014 13:25:00 +0000 https://www.imx6rex.com/?p=5511#comment-55 Hi, thank you :)

- The module has CAN on the board 2 board connector (if you dont use one of the SD cards). We are working on Baseboard Lite and a header for CAN testing will be available there.

- Yes, there is space for a huge heatsink or even a fan inside. I used DesignSpark (free software) to draw the box. The final color and lights were adjusts by friend of mine in Solidworks. Once the files are ready, I will place them here, so anyone can download it – or if people are interested I will place them here also sooner. At this stage, there is still quite a lot of work on it …

]]> By: mad jijou https://www.imx6rex.com/2014/08/imx6-rex-enclosure-in-3d-first-version/#comment-54 mad jijou Wed, 06 Aug 2014 13:06:00 +0000 https://www.imx6rex.com/?p=5511#comment-54 Amazing! Would it be possible to place a fan inside?
I’m really interested by the box design, how did you design it? is it molded? The connector “holes” are they molded also?

That’s a really great project you have there, i wish it had can bus available :( .

]]>